Smoke alarm won't shut up

xXx-Anonymous-xXx said:
Your fire alarm is wired and receiving power from a source, the battery is just a back up. The intermittent beep means the primary power is still unavailable and only running on battery. Somebody gotta reset / restore power to the circuit breaker


And this is basically it. Who knew kaw would know and not Google
 
I fixed it. Apparently when the carbon monoxide detector is low on battery then the smoke alarm goes off. Thanks everyone!
 
AmericanChurro said:
*fire alarm won't shut up*

*turns out to be the carbon monoxide alarm not shutting up*
It was actually the fire alarm. When the carbon monoxide detector is low battery the fire alarm receives a signal which tells it to start beeping
 
xXx-Anonymous-xXx said:
Your fire alarm is wired and receiving power from a source, the battery is just a back up. The intermittent beep means the primary power is still unavailable and only running on battery. Somebody gotta reset / restore power to the circuit breaker.

Yup. I actually had to deal with this last week myself. Alarm is hard wired, in addition to battery. You have to flip the switch in the circuit breaker, take the battery out then hold down the test button on the alarm to clear it. Then put battery back in, switch the power back on to that curcuit via the panel, then finally reconnect the alarm to the hard wire. Sucks. .. I was really driving myself crazy trying to stop the beeping.
 
Back
Top